A microscopic war zone
Every moving powertrain part is a battlefield of friction, extreme heat, and contact pressure.
An advanced cascade additive system engineered for the formulation of mid-tier gasoline and diesel engine oils. Optimised for blending monograde and multigrade lubricants using Group I and Group II base stocks at cost-effective treat rates. The package integrates a highly effective balance of metallic detergents, ashless dispersants and advanced anti-wear agents, delivering outstanding piston and ring cleanliness, superior wear protection and excellent resistance to high- and low-temperature deposits. Also suitable for motorcycle engine oils meeting JASO MA2 and JASO MB.
| Level | Treat Rate % | TBN |
|---|---|---|
| PSAB71 2300 | 9.50% | 13.8 |
| VW501.01/505.00 | 9.50% | 13.8 |
| MB229.1 | 8.00% | 11.6 |
| ACEA A3/B3 | 7.30% | 10.6 |
| SL/CF-4 | 5.90% | 8.6 |
| SL/CF | 5.70% | 8.3 |
| SJ/CF-4 | 5.40% | 7.8 |
| SJ/CF | 4.60% | 6.7 |
| SG/CF | 4.20% | 6.1 |
| SG/CD | 3.10% | 4.5 |
| SE/CD | 2.70% | 3.9 |
| SC/CC | 1.90% | 2.8 |
| SB/CB | 1.60% | 2.3 |
| JASO MA2 | 6.50% | 5.7 |
| JASO MB | 6.50% + 0.3% RCH5830 Booster | 5.9 |
Every moving powertrain part is a battlefield of friction, extreme heat, and contact pressure.
Even mirror-polished steel asperities collide violently at microscopic surface levels.
Raw base stock breaks down under severe shear, heat, and combustion blowby.
Broader performance spectrum, lighter viscosities, lower treat rates, zero compromise.
Viscometry versatility cascades single core additive packages across multiple viscosity grades.
Engineered to meet global API, ACEA, ILSAC, and JASO standards — batch after batch.
| Test | Method | Value |
|---|---|---|
| Appearance | Visual | Brown Viscous Liquid |
| Kinematic Viscosity @ 100°C | ASTM D445 | 70 cSt |
| Density @ 15°C | ASTM D1298 | 1016 kg/m3 |
| Flash Point (COC) | ASTM D92 | 206 °C |
| Base Number | ASTM D2896 | 145 mgKOH/g |
| Nitrogen | ASTM D3228 | 0.6 %mass |
| Calcium | ASTM D5185 | 4.85 %mass |
| Phosphorus | ASTM D5185 | 1.35 %mass |
| Zinc | ASTM D5185 | 1.61 %mass |
| Molybdenum | ASTM D5185 | 0.04 %mass |
| Sulphated Ash | ASTM D874 | 18 %mass |
Request the full data sheet, a sample, or formulation support from our technical team.
Talk to our team →Partner with ADDLAR's formulation specialists. Reach out directly or leave a technical specification inquiry below to discuss your custom additive package requirements.
Submit your specification request or general inquiry below.
Official Technical Data Sheet (TDS) and formulation dispatch service.